Dental Handpiece Bearings
1 true 450000 RPM high speed
Dedicated P4 / ABEC 7 precision
Stainless steel (440 C) and ceramic ferrule (silicon nitride) ball
Compound fiber reinforced phenolic retainer
If the drill bit can reach very high speed, can reduce the pain of
patients in the treatment of teeth. 45 thousand revolutions per
minute is internationally recognized dental drill bearing can reach
the highest speed can reach the requirement of bearing manufacturer
in the world did not several, and strong bearing force is really
one of them. In order to produce the highest quality of dental
drill bearing, we did a lot of tests and experiments, up to now we
have stable yield and quality bearings.
2 dedicated ABEC7 P4 bearing precision:
In addition to 450000 rpm, it is another important factor to
measure a bearing manufacturer's ability to achieve ABEC7 P4
bearing accuracy. Although many factories in their products marked
P4/ ABEC7 precision, but once you find the use of these bearings
can be easily them and not the degree of accuracy and the accuracy
grade of most of these counterfeit bearings only ABEC3. This is
part of the dental bearing special low price.
But the low quality of the dental bearing will greatly hurt the
drill and mobile phone equipment. According to statistics, more
than 60% of the bearing market is flooded with fake bearings. Due
to the limitation of materials and manufacturing technology, the
rigidity of these low end bearings can not meet the national
standard, which will shorten the service life of the instrument,
and cause damage to other parts. The gap between different ABEC
accuracy levels may also lead to assembly difficulties, or even
scrap the entire device. Intense bearing has become the country's
leading micro bearing manufacturers, and truly achieve the ABEC7 P4
level, and even individual models can reach ABEC9 P2.
3 stainless steel (440 C) and ceramic ferrule (silicon nitride)
These rings can drill bearing made of stainless steel (9Gr18), and
the rolling of the material is a silicon nitride ceramic ball. The
selection of high quality raw materials significantly improved the
durability of the bearing and speed, so as to ensure the overall
performance of the dental drill bearing.
4 composite fiber reinforced phenolic retainer:
100% focus on the details of each bearing product quality. Compound
fiber reinforced phenolic retainer has been treated by a rigorous
and complex chemical process. To ensure that the bearing can be
under the maximum 450 thousand speed of about 18 months of
operating life, and the whole process of the rotation is low noise,
low vibration. Because of the chemical oil immersed in a retainer,
so these dental bearing with self lubrication function good.
Mobile phone maintenance drill bearing
1 clean exterior surface of the nose.
2 insert drill chuck.
3 according to the following steps to clear the phone inside the
A. spray cleaning for 1 to 2 seconds.
B. use paper towels to wipe the nose of debris and debris.
C. repeat the above 2 steps until completely clean.
D. dry nose surface of the liquid.
E. repeat the action until the surface is completely dry.
4 according to the manufacturer's instructions with mobile phone
5 head cooling to room temperature.
6 drops of 2 drops of lubricating oil into the drive air pipe.
7 wipe off the excess oil.
8 wipe the outer surface.
9 now the drill can use mobile phone.
In order to guarantee high speed performance, dental bearing
loading unit should add a certain axial load. Users in the
installation and use should be careful operation and careful
installation and maintenance, in order to avoid damage to the ball
and channel, bearing pollution and improper lubrication will
directly affect the performance index and service life. Our dental
drill bearing products include: dental bearings, bearings for
dental, dental handpiece bearings, dental bearings, dental
handpiece Peilin, high-speed bearings, bearing phone bur bearing.